Rating of water meters

To choose the best counter that suits you 100%, you should clearly distinguish between your wishes and budget, and also understand in what conditions the device will work.

1. Conditions - in all apartments in old houses there are problems with plumbing. Even if your pipes are changed, it is far from the fact that everything is fine with the pressure in the common house system. Owners of such housing should look at meters with water hammer protection and endurance.
2. Cost is one of the main criteria. However, the difference between different brands usually does not exceed 200-300 rubles. So you shouldn't deal with dubious savings and take the cheapest Chinese water meters. Check out the brands from the list of the best water meters.
3. The guarantee is the best indicator of reliability, because the manufacturer is responsible for its water meters and undertakes to repair or replace the defective meter (usually it is the replacement that takes place).

Otherwise, there is only one advice - look at the reviews, read the tops and reviews of the best models, trust the installation to professionals, and everything will be fine.

Best water meters

Norm SVKM-15U

SVKM-15U is a series of universal meters designed to measure the actual consumption of cold and hot water. The model is designed for a maximum volume of no more than 1.0 MPa. The body of the device is made of high-quality brass alloy LS-59 by casting. This material is characterized by resistance to intense water impact, which ensures a long service life of the meter. As an additional measure of protection, the manufacturer covers the case with a layer of chrome.

The model belongs to the category of vane-type meters - the principle of operation is based on measuring the number of revolutions of an impeller rotating due to the passing water flow. Measurement results are displayed in cubic meters. The model complies with the requirements of current standards and is included in the state register of measuring instruments. There is a special clutch to protect the mechanism from the influence of an external magnetic field.

The manufacturer offers users the upgrade of the base model by installing a pulse sensor for remote data transmission or expanding the operating temperature range. Manufacturer's warranty - 36 months from the date of initial verification.

VALTEC VLF-15U-I

VALTEC VLF-15U-I is a universal cold and hot water meter from a well-known company that specializes in the production of engineering sanitary ware. The model is distinguished by its reliability and quality of workmanship, which ensures a long service life - the mean time to failure reaches 86 thousand hours.

The meter is equipped with a pulse output, which allows organizing remote transmission of readings. In addition, the design provides for the possibility of equipping the device with an RS-485 standard connection channel. The housing is protected against external magnetic fields in accordance with the requirements of the applicable standards. The model is included in the register of measuring instruments, which allows you to freely use the device on the territory of Russia.

By the type of execution, the device belongs to the category of single-jet dry-running meters, in the flow part of which there is an impeller rotating due to the kinetic energy of the liquid. The counting mechanism is isolated from the measured medium by a special cover with an O-ring.

ECO NOM SV 15-110

ECO NOM SV 15-110 is a simple and reliable Russian-made universal meter designed to measure the actual consumption of cold and hot water. The model is characterized by a low level of error and high throughput. This meter is ideal for use in apartments and private households.

For the manufacture of the case, high-quality materials are used that are resistant to intense exposure to a humid environment. The principle of operation of the meter is extremely simple - an impeller is located inside the housing, which rotates under the action of water pressure. The measurement results are displayed on the display using a roller-type indicator device. Cubic meters are used as a unit of measurement.

During the installation process, the counter must be installed in a horizontal position, with the dial facing up. To increase the service life, it is recommended to install a ball valve and a mechanical filter in front of the entrance. In the process of fixing threaded connections, the tightening torque should not exceed 40 N * m.

Betar SHV-15

Betar SHV-15 is a cold water meter, which is distinguished by high quality performance and resistance to external factors. The model is designed for operation at temperatures from 5 to 50 ºС and relative air humidity not more than 80%. The maximum volume of liquid should not exceed 1.5 cubic meters per hour. The degree of protection against ingress of dust and moisture corresponds to class IP 54.

The peculiarity of this model is that users can independently select a complete set of the device, based on personal preferences and operating conditions. The basic design can be upgraded by installing a pulse output for connection to an automated energy metering system, a check valve, as well as anti-magnetic protection, which will prevent manipulations with meter readings.

This model is covered by an official manufacturer's warranty, which is valid for 42 months from the date of manufacture. It should be remembered that the company is not responsible if the water does not meet the requirements of sanitary and epidemiological rules and regulations.

ITELMA WFK20.D110

ITELMA WFK20.D110 is a mechanical cold water meter designed for installation in individual houses, apartments, offices and administrative buildings. It should be borne in mind that the maximum permissible water flow rate is 1.5 m3 / h. The model is protected from external magnetic field by means of a special coupling.

The principle of operation of the meter is based on measuring the number of revolutions of the impeller rotating under the action of the flow of water flowing in the pipeline. The torque is transmitted by means of magnetic couplings to the indicator device. This device, through a scaled mechanical gearbox, displays the measured volume of water with five black rollers using five black rollers, two red rollers and an arrow indicator. As an option, users can order the meter together with an installation kit, which includes two gaskets and two threaded nipples made of brass alloy.

Meter SVU-15

Meter SVU-15 is a universal meter for measuring the level of consumed cold and hot water, which flows through pipelines with a pressure of no more than 1.6 MPa. The model is ideal for installation in apartments, residential buildings and commercial buildings where the nominal water flow does not exceed 1.5 m3 / h. It is worth noting the high quality of the device - the meters are assembled at a factory with an automated production line, which ensures a high level of accuracy.

Due to its compact size, the meter can be installed in confined spaces. A special sleeve provides reliable protection against external magnetic fields. The design features virtually eliminate the likelihood of breakdowns and water leaks. The model is able to withstand short-term temperature rises up to 100 ºС without negative consequences. If necessary, the base model can be upgraded by installing a sensor or module for remote transmission of readings.In addition, users can order a mounting kit that includes a check valve and secure tapered fittings.